Print

Entel DT885M UHF ATEX IIB approved LCD complete (EU)

Productcode: 29706885DT
The ultra durable DTEx Series sets the benchmark for next-generation on-board radios. Standard features include both analogue and digital modes of operation, channel voice annunciation option, high visibility OLED display, high torque ergonomic controls designed for gloved-hand use, and industry-leading IP68 2m 4 hours submersible rating, to provide 100% reliability and usability even in the most extreme conditions.

As standard the DT Series portable is supplied with:

Li-Ion battery pack
Drop in charger
Belt Clip
High Efficiency Antenna
Quick Start User Guide

IECEx IIB Approved - The DT885M ATEX certified portables meet IIB T4 - the most stringent ATEX ratings as per EU directive 94/9/EC.

General
Frequency Range UHF 450-470MHz
Channel Spacing Analogue / Digital 12.5 & 25 KHz / 12.5 KHz
Operating Voltage 7.4v
Weight 435g
Overall Dimensions (HxWxD) 138mm x 60mm x 38mm
Programmable Buttons 3
Channels up to 99
Battery CNB950EV2 1800mAh Lithium-Ion
Battery Endurance (5/5/90) Analogue mode 12 hours
Battery Endurance (5/5/90) Digital mode 17 hours
Transmitter
Output Power UHF ATEX IIB 2 Watts
Modulation Limiting ±2.5kHz @ 12.5kHz
±5.0kHz @ 25kHz
Conducted / Radiated Spurious Emissions Better than -36dBm
Adjacent Channel Power Better than 60dB
Audio Distortion (typical) 3%
Receiver
Sensitivity (Typical) Analogue
-121dBm (0.2uV) for 12dB SINAD
Digital
-121dBm (0.2uV) for 5% BER
Intermodulation response rejection (ETSI) > 70dB
Adjacent Channel Selectivity (ETSI) > 70dB(12.5KHz) 60dB(25KHz)
Spurious Response Rejection (ETSI) > 70dB
Audio Output Power 1 Watts
Audio Distortion (typical) 3%
Conducted Spurious Emission (ETSI) > - 57dBm
Environmental
Operating Temperature -20°C to +55°C
Storage Temperature -40°C to +85°C
Thermal Shock, Humidity, Shock & Vibration, Packing Test, Drop Test MIL-STD810 C/D/E/F/G
Water Ingress IP68 2 metres, 4 hours submersible
Ex Protection ATEX II 2G Ex ib IIB T4 Gb

KEY FEATURES

99 Channels
IP68 Submersible (2m, 4 hours)
MILSTD construction 810C/D/E/F/G
High capacity Li-Ion battery
Exceptionally loud & best clarify audio - in class
Display channel number & frequency
Programmable buttons
Gold plated accessory connector
Locking accessory connector
Accessory audio tailoring optimises audio for each accessory
Easy to read, high contract white on black OLED display
Drag and drop end user programmer, no need to visit site
Documents
PDF
PDF
PDF
Download this page
PDF
Related products
CMP/DT9 Remote speaker mic for ATEX models only
CMP/DT9 Remote speaker mic for ATEX models only
Entel CNB950E batt ATEX approved for HT8 DT8** & HT9 DT9**
Entel CNB950E batt ATEX approved for HT8 DT8** & HT9 DT9**
Entel CXR16/DT9 MED/ATEX Bone conductive throat mic incl PTT
Entel CXR16/DT9 MED/ATEX Bone conductive throat mic incl PTT
Entel CXR5/DT9 MED/ATEX Bone conductive skull mic incl PTT
Entel CXR5/DT9 MED/ATEX Bone conductive skull mic incl PTT
Entel DT842M VHF ATEX IIB approved LCD complete (EU)
Entel DT842M VHF ATEX IIB approved LCD complete (EU)
Entel DT885FF MED Approved UHF ATEX IIB with CLB850 battery
Entel DT885FF MED Approved UHF ATEX IIB with CLB850 battery
Entel DT885M UHF ATEX IIB approved LCD complete (EU)
Entel DT885M UHF ATEX IIB approved LCD complete (EU)
Entel EA12/DT9 IECEx & ATEX approved Earpiece Microphone
Entel EA12/DT9 IECEx & ATEX approved Earpiece Microphone
Entel HD leather case with strap CLCDT2 for DT**2 radio
Entel HD leather case with strap CLCDT2 for DT**2 radio